You are looking for a durable acrylic finish for your exterior siding surface, we are the specialists.

Consult the different text information related to the multiple surfaces.

The acrylic parging is the ideal solution for your parging repairs or to cover your new foundations, the best durable finish for your outdoor parge coat, cement balcony surface or concrete walk and much more ...

Finishing on a foundation covered with existing parging

In the preparation of the surface, we remove any existing parging which takes off and we recover the debris, a pressure washing is necessary before applying the first filling layer, then we apply the basecoat and reinforcement mesh on the entire surface, 24 hours later, we can apply the acrylic finish.

Acrylic finish on a new foundation.

The preparation consists of grinding the apparent tar and the undesirable bumps. All imperfections can be grounded to make the surface more upright and to allow better adhesion of the basecoat, a pressure wash is needed to remove the dust due to grinding, a fill layer on the surface holes is applied, then comes the basecoat with the reinforcement mesh over the entire surface, last step the acrylic finish.

Acrylic finish on a concrete block surface.

The imperfections can be removed to make the surface more upright and the holes must be filled, a pressure wash is needed to remove the dust, a first fill layer over the entire surface allows to rectify the surface and then we apply the basecoat with reinforcing mesh of type 15oz to ensure good resistance in case of opening of the joints of blocks and the last step is the acrylic finish.

Acrylic finish on insulation concrete forms.

We can apply on insulation blocks of all brands for example: Nudura insulated concrete forms, IntegraSpec, Keps, Thermoform etc ... The imperfections are sandblasted with a sandblaster designed for this purpose to make the surface more upright and The holes have to be filled before the basecoat, a first filling layer in some places to rectify the surface and then we apply the basecoat with the reinforcing mesh over the entire surface and ultimately the finish coat.

Finishing on a balcony surface and steps.

In the preparation of the surface, we remove any existing parging which takes off and we recover the debris, a pressure washing is necessary before applying the first filling layer, then we apply the basecoat and reinforcement mesh on the entire surface, 24 hours later, we can apply the acrylic finish. Another 24h so that the customer can apply the sealant coat, the sealant is included in the contract and is handed over to you at the end of the work and in some cases we apply the sealant.

Finishing on a pool contour.

During the preparation of the surface we repair all the holes or cracks, a pressure washing is necessary before applying the first filling layer, then we apply the basecoat and reinforcement mesh on the entire surface, 24 hours later, we can apply the acrylic finish. Another 24h so that the customer can apply the sealant coat, the sealant is included in the contract and is handed over to you at the end of the work and in some cases we apply the sealant.

Finishing on a descent of stairs and low walls.

The preparation consists of grinding the apparent tar and the undesirable bumps. All imperfections can be grounded to make the surface more upright and to allow better adhesion of the basecoat, in this picture we see that only the walls have been made, but for a descent of stairs we can make all the steps and counter steps, as well as the floor of the descent and wall, in fact everything that is apparent, consult our photo gallery.

Acrylic finish on insulation panel.

The beauty with insulating panel is that we can create any form imaginable, the only limit is your imagination, in addition it can be worked to rectify an irregular surface. At the same time, it provides insulation with a different -R- value according to its thickness, without forgetting its soundproofing.

Acrylic finish on an aggregate wall.

We can transform your aggregate wall into an acrylic wall without having to install an insulating panel or without removing your aggregate wall before doing the work. We have developed a durable and resistant way of making, we can add moldings of all kinds according to your imagination.

Finishing on a wall of Stucco.

We can transform your stucco wall into an acrylic wall without having to install an insulating panel or without removing your stucco wall before doing the work. We have developed a durable and resistant way of making, we can add moldings of all kinds according to your imagination.

Finishing on a lightweight concrete panels.

We can apply on lightweight concrete panels (fiber cement board) of all brands such as Durock or Permabase or other panel. We use plastic corners specially designed for this purpose to rectify a window or door contour. We apply a first coat on the panel joints with reinforcing mesh then we apply the basecoat and reinforcement mesh on the entire surface, 24 hours later, we can apply the acrylic finish.

Acrylis finish on a brick wall.

We can transform your brick wall into an acrylic wall without having to install an insulating panel or without removing your brick wall before doing the work. If you have paint on your wall no problem we have a primer specially designed for this kind of surface. Then we apply the base coat with the reinforcement mesh of type 15oz to ensure a good resistance in case of opening of the joints of brick and then the step of the finishing.

Crépi Acrylique

Fuse
Tous droits réservés 2017 © Crépi Acrylique
  • Richer Marley
  • Owner
  • 514-966-3460
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Emmanuel Marley
  • Quotation - Estimate
  • 514-706-1158
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
Useful links